Stone Care International Granite & Stone Sealer Pour

• Protects natural stone surfaces from water and staining
• Safe to use on food contact surfaces
• Does not leave residue or streak marks

Directions

• Thoroughly clean surface with Stone Care International® Granite & Stone Daily Cleaner or Marble Daily Cleaner before sealing.
• When surface is clean and completely dry, test Stone Care International® Granite & Stone Sealer in an inconspicuous area before use. Always use in a well-ventilated area.
• Liberally apply to the entire surface until it is evenly wet. If sealer is absorbed immediately, apply another application to the surface.
• Allow sealer to penetrate the surface for 5 minutes.
• Wipe excess sealer from surface with a clean cotton cloth. If excess sealer dries on the surface, apply more sealer and wipe off immediately with a clean cotton cloth.
• Allow sealer to cure 4–6 hours before using surface. Keep surface dry and free from substances that could stain for 24 hours.
• For extra protection, apply a second coat.

Reseal stone every 6–12 months or as needed. To test, pour water (about 3 inches in diameter) on the surface in several locations and let it sit for 30 minutes. If you see a dark mark or ring